For macOS: If it does not improve, turn off the printer, wait for more than 24 hours, and go to the next step. Step4 Clean the print head deeply again. After cleaning the print head deeply again, print the nozzle check pattern and check the result. If it still does not improve, go to the next step. Step5 Perform ink flush. #technology #techfix #tutorials #howto #canon #printer#Printerblankpageproblem #printerblankpagecomeout #printerblanklineIn this video I will show you how to If your ink level is low, the print head alignment sheet won't print correctly. You will need to replace the FINE cartridge. For the alignment use a clean, white sheet of A4 or Letter-sized plain paper (recycled paper is OK). There are two steps to print head alignment: Print the alignment sheet. Scan the printed alignment sheet. 1.
Notes on Site Usage and Cookies; ER002. List of Support Code for Error (Paper Jams) If paper jams, remove it following the appropriate procedure as shown below.
2.nozzle report attached. It not showing magenta. 3 ink tank snap attached. All having more than half ink. 4. Checked for bubble but not able to spot any. 5.print volume is very low. May be 2-3 in a week on average but sometimes i have printed 30 to 40 pages in a single go. Important. Do not tilt the printer or do not it upside down. Doing so may cause the ink to leak. Check7 Clean paper feed roller.. Cleaning the Paper Feed Rollers; If the measures above do not solve the problem, contact your nearest Canon service center to request a repair. Note! Work 100% Sponsor : ABA: 002350666 Chan Bora#technologynewsSubscribe to my channel Link:#HowtoInstallPrinter : https://www.youtube.com/playlist?list=PL 0v3BV.
  • dtbt0cca32.pages.dev/321
  • dtbt0cca32.pages.dev/36
  • dtbt0cca32.pages.dev/221
  • dtbt0cca32.pages.dev/27
  • dtbt0cca32.pages.dev/10
  • dtbt0cca32.pages.dev/222
  • dtbt0cca32.pages.dev/333
  • dtbt0cca32.pages.dev/283
  • dtbt0cca32.pages.dev/175

    • canon g2010 won t print